TennaMINI 2.0 Plug-In Solar
Overview
Ideal for heavy and mid-sized equipment and engine-powered machines, the TennaMINI 2.0 Plug-In Solar tracker provides precise construction equipment GPS tracking for heavy equipment and engine run-time data for high-value heavy yellow iron and mid-sized machines.
- Excavators
- Dozers
- Cranes
- Pavers
- Loaders
- Graders
- Engine-powered Generators
- The list goes on!
Use
- Captures location and ignition on/off data, transmitted across cellular networks directly to Tenna for asset location updates.
- Durable, easy-to-install and long-lasting with a rechargeable battery and net zero power consumption for reliable equipment tracking and management.
Technology
- Data is transported across cellular networks directly to the Tenna platform for updates on asset location and ignition start and stop events.
Reporting
- Reports device position (GPS location) and ignition state every two minutes when engine is running, and device position (GPS location) once every 23 hours when engine is off.
- Immediate alert when an asset has left a geofenced location, even if powered off (e.g. being towed), to know if equipment is moving after hours or at unexpected times.
- Recharges via sunlight or through asset power when ignition is on for indefinite lifespan.
- Net zero impact on asset battery. Draws less power than a normal battery’s self-discharge.
Compatible Products
Specs
- Built-in cellular and GPS antennas for easy installation.
- Operating modes include:
- Running (Ignition on) – reports location, engine ignition data, asset battery level, and other tracker insights
- Not running (Ignition off) – reports location only
- Size – 6.5″ x 5.1″ x 1.9″
Ruggedized
- IP69 housing
- Extremely rugged casing with no holes
- Tough dust and water-proof PA6 housing for impact and thermal resiliency
- Rugged printed circuit assembly for high G-force tolerance
TennaMINI 2.0 Solar
GPS Equipment Tracker Overview
Ideal for tracking the position of your heavy and midsized equipment and machines, the TennaMINI 2.0 Solar provides precise GPS tracking for full visibility and effective management of your valuable equipment. This device is a high quality, cost effective, and longterm solution for autonomously monitoring your assets, and has a net zero impact on the asset’s battery. The TennaMINI 2.0 Solar re-charges from the sun.
Features
- Durable, easy-to-install and long lasting for reliable fleet tracking and management
- Captures location data across cellular networks directly to Tenna for asset location updates
- Multiple operating modes (solar model) allowing for stationary and motion-based ping rates
- Delivers insights on where your assets are on the map and where they have been
Compatible Products
- Trailers
- Arrow Boards
- Pumps
- Conex Boxes
- The list goes on!
Use
- This gps tracker’s size and durability allows it to mount outside in full sun.
- Durable, easy-to-install and long-lasting for reliable equipment tracking and management.
Technology
- Data is transported across cellular networks directly to the Tenna platform for updates on asset location.
Reporting
- Provides device position and GPS location report every 23 hours.
- At a reporting rate of once per day, operating time is indefinite, as long as there is a light source to energize the unit.
Specs
- 6.5” L x 5.1” W x 1.9” H
- Built-in cellular and GPS antennas
- Reports device position (GPS location) once every 23 hours
- Immediate alert when an asset has left a geofence location, even if powered off (e.g. being towed), to know if equipment is moving after hours or at unexpected times
- Supports a long lifespan when continuously exposed to sunlight
- Net zero impact on asset battery
- IP-69 extremely rugged housing
- Tough dust and water-proof PA6 enclosure for impact and thermal resiliency
Ruggedized
- IP69 housing
- Extremely rugged casing with no holes
- Tough dust and water-proof PA6 housing for impact and thermal resiliency
- Rugged printed circuit assembly for high G-force tolerance
TennaMINI Battery
Overview
Ideal for tracking position of equipment and machines, the TennaMINI Tracker (Battery) provides precise GPS equipment tracking.
- Trailers
- Arrow Boards
- Pumps
- Conex boxes
- The list goes on!
Use
- This tracker’s compact size and durability allows it to mount outside (recommended) or within an asset.
- TennaMINI Tracker Battery is flexible, durable, easy-to-install and long-lasting for reliable equipment tracking and management.
Technology
- Data is transported across cellular networks directly to the Tenna platform for updates on asset location.
- Provides device position and GPS location report every 23 hours.
Reporting
- At a reporting rate of once per day, operating time is up to 4 years.
Compatible Products
Specs
- Built-in cellular and GPS antennas for easy installation.
- Self-contained LTE Cat M1/NB1 GPS tracker.
- Size – 5″ L x 2.25″ W x 1.25″ H
Ruggedized
- IP67 rated and verified housing
- Tough ASA housing for impact and thermal resiliency
- Rugged printed circuit assembly for high G-force tolerance
TennaMINI Accessories
TennaCAGE
Tracker Accessory Overview
Ideal for protection from impact in dynamic construction environments as well as construction theft prevention for high-value equipment and associated attachments, TennaCAGE is a steel enclosure that gets welded onto assets around a TennaMINI tracker (Solar or Battery) for extra security. TennaBLE Beacons can also fit inside. The CAGE is designed to provide asset trackers an additional layer of protection and security while still giving trackers proper exposure to the sun and sky to function properly. The TennaCAGE is a great construction theft prevention as it increases the likelihood that stolen assets will be recovered and can deter theft overall by protecting asset trackers from tampering.
Bolt or weld onto your Heavy Equipment such as excavators, loaders, dozers, etc. as well as Midsized Equipment including but not limited to generators, light towers, trailers, and other towable assets.
Compatible Hardware
Details
- Attached around asset trackers via welding or bolting down for heavy duty protection and construction theft prevention
- Highly durable against temperature, rust and impact
- Provides a clear view of the sky for cellular GPS signal reception for all TennaMINI trackers, and sun exposure for solar charging for TennaMINI Solar trackers
Now Available in More Sizes!
TennaCAGE Specs
- 10.75” L x 4.25” W x 2.25” H
- 3/16” thickness (0.1875”)
- Meets the chemical composition bend rest requirements of ASTM A1011/1018 CS Type B
- CS Type B, stamped steel
- Zinc gray primer finish to protect from corrosion
TennaCAGE 2.0 Specs
- 12.9” L x 5.9” W x 2.85” H
- Meets the chemical composition bend rest requirements of ASTM A1011/1018 CS Type B
- CS Type B, stamped steel
- Zinc gray primer finish to protect from corrosion
Video
TennaTEST
Tracker Accessory Overview
The TennaTEST is a tool to assist in the TennaMINI Plug-In installation process by quickly determining if your power source and ignition connections are correct.
Benefits
- Identify installation issues instantly while mechanics are on site and available.
- Troubleshoot devices before spending time with customer service.
- Understand if issues stem from battery voltage or ignition wire.
Compatible Hardware
Details
- Keep on hand for troubleshooting and installation of new devices.
- Eliminate installation problems if devices are not reporting data correctly.
- Improve communication with your customer service team when problems arise.
Ready to See More?
Schedule a Demo
